How to choose anticorrosive paint

Choose preservative paint to grasp the following three points:

1.The use environment;

2.The basic material;

3.The performance requirements.

Performance requirements refer to the expected effects of the paint film, such as painting an iron door, only wanting to change the color of the iron door or renovate, only wanting to achieve the effect of rust prevention, you can choose the relatively cheap alkyd paint to meet.

If there are corrosive factors inside the workshop, it is necessary to carry out anti-corrosion treatment on the steel structure base surface in the workshop In this case, it is necessary to choose coatings with good corrosion resistance, such as epoxy primer with acrylic polyurethane topcoat or two-component heavy anti-corion coating. These coatings can prevent the paint surface of the steel structure from being corroded and damaged. If you also need the paint surface to have better and longer weather resistance self-cleaning effect, you should consider fluorocarbon topcoats and other coatings with relatively high prices. Therefore, when choosing anti-corrosion coatings it is best to analyze them in reverse order and choose the appropriate coatings according to the budget. Quality and cost are always proportional.

Jiangmen paint provides long-lasting fluorocarbon topcoat system.

Epoxy zinc-rich primer & Cloud iron mid-coat & Fluorocarbon topcoat

Suitable for marine or inland weathering lasting 20-25 years.

Fluorocarbon topcoat

Product features

-Excellent weather resistance and anti-corrosive performance.

-Excellent light fastness and color fast.

-Tough paint film, good gloss, no powdering, no yellowing, good decoration.

-Good resistance to chemicals and water, mineral oil, vegetable oil, petroleumvents and petroleum products.

-Good impact resistance and wear resistance.

Application

Suitable for large vehicles, train carriages, locomotive cabs, yachts, ships, docks, bridges, machine tools, instruments, chemical, petrochemical equipment, storage tanks, sanitation vehicles, port machinery, marine climate steel structures or atmospheric environment steel structures, aluminum alloy surface for high performance paint.

Product parameters

-Color appearance: all colors are shiny

-Solid content: (66±2)%

-Flash point: 27℃

-V: 315g/L

-Specific gravity: 1.3g/cm3

-Dry film thickness: 40um

-W film thickness: 80um

-Theoretical coating rate: 13m2/L,10m2/kg

Surface treatment

Steel coated with a previous rich zinc primer, epoxy cloud iron intermediate paint, epoxy antirust paint must be clean, dry, free of oil, dust, zinc salts and other contaminants. Galvanized steel and aluminum alloys must be treated with sandblasting.